ASTM A203 Grade F Steel Plate for Cryogenic Se

The demand for reliable materials in cryogenic service applications has increased significantly with the rapid growth of LNG terminals, industrial gas storage facilities, and low-temperature pressure vessels.

2026-06-24
Benefits of Using ASTM A203 Grade F Steel in L

As the global demand for liquefied natural gas (LNG) continues to grow, the need for reliable materials for cryogenic storage systems has become increasingly important.

2026-06-18
ASTM A203 Grade E: Low-Temperature Nickel-Allo

For engineers specifying materials for cryogenic pressure vessels, finding the balance between strength and ductility at sub-zero temperatures is challenging.

2026-06-12
Low-Temperature Toughness and Applications of

In industries where equipment must operate reliably under freezing or cryogenic conditions, material selection becomes a matter of safety and structural integrity.

2026-06-01
ASTM A203 Grade B vs ASTM A106 Grade B

While both ASTM A203 Grade B and ASTM A106 Grade B serve critical roles in industrial applications, they are fundamentally different in composition, purpose, and performance.

2026-06-01

Need advice, or a quote?

P355NL1 steel plate supplier, P355NL1 steel seller

P355NL1 steel grade is a normalized, weldable fine grain steels for pressure purposed. The dimensions and tolerance on dimensions should be according to EN 10028-1.

P355NH is a normalised steel grade with a minimum yield strength of 275-460 N/mm² and plates are available ex–stock from our warehouse.

P…N mean the room temperature, P…NH means the elevated temperature quality.

P…NL1 means the low temperature quality, P…NL2 means the special low temperature quality.

P355NL1 steel plate sizes:

Thickness: 5mm to 300mm,

Width: 1500mm to 4050mm,

Length: 3000mm to 15000mm

Heat treatment: Normalizing,Annealing,Tempering,Quenching,Hardening and tempering,Seasoning,Surface hardening,Carburizing

P355NL1 Chemical composition cast analysis:

Element	P355NL1 Max %	Element	P355NL1 max %
C	0.18	Cr	0.30
Si	0.50	Cu	0.30
Mn	1.10-1.70	Mo	0.08
P	0.025	Nb	0.050
S	0.015	Ni	0.50
AL	0.020	Ti	0.03
N	0.012	V	0.01

P355NL1 Mechanical properties:

Grade	Type	Thickness	Yield Strength	Tensile Strength	Elongation	Impact Energy
		(mm)	MPa (min)	MPa	% (min)	(KV J) (min)
						-40 degree
P355NL1	Normalized	≤ 16	355	490-630	22	27
		16> to ≤40	345	490-630	22	27
		40> to ≤60	335	490-630	22	27
		60> to ≤100	315	470-610	21	27
		100> to ≤150	305	460-600	21	27
		150> to ≤250	295	450-590	21	27

P355NL1 and P355NL2 compared

The differences between P355NL1 and P355NL2 can be seen in the tables below but are summarised as follows:

Chemistry: P355NL2 has a more tightly controlled Phosphorus and Sulphur content

Mechanical Properties: P355NL2 has higher required impact values at all specified temperatures and in both longitudinal and transverse directions. It also specifies requirements for transverse impact testing at -50 deg C.

Any need in P355NL steel plate, please feel free to contact us by email or calling us.