-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
S235J0 Carbon structural steel plate steel sheet
S235J0 Carbon structural steel plate steel sheet is a low carbon, high tensile strength structural steel which can be readily welded to other weld-able steel. With its low carbon equivalent, it possesses good cold-forming properties. The plate is produced by fully killed steel process and supplied in normalized or controlled rolling condition.
Specification of S235J0 Carbon structural steel plate steel sheet:
Standard: EN 10025
Number: 1.0114
Thickness: 2mm-300mm
Width: 1000mm-4000mm
Length: 3000mm-18000mm
Chemical Composition (max %):
|
Grade |
C% |
Si % |
Mn % |
P % |
S % |
N % |
Cu % |
CEV |
|
S235J0 |
0.17 |
- |
1.40 |
0.035 |
0.035 |
0.012 |
0.55 |
0.38 |
S235J0 Carbon structural steel plate steel sheet are widely used in Building, underground engineering, bridge structures, marine structures, container manufacturing etc.