SA299 Gr.B Steel Plate

Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.

2026-08-26
ASTM SA299 Gr.A and SA299 Gr.B steel plates

SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.

2026-08-19
SA299 Gr. A Steel Plate for Boilers and Pressu

ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.

2026-08-11
What is the difference between A285 Gr. C and

A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.

2026-08-04
What material is SA283 Gr.B?

SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.

2026-07-31

Need advice, or a quote?

Wholesale COR-Ten A anti-corrosive steel plate

COR-Ten A steel is the representative of Cu - P series steel grade. COR-Ten A steel is a weather resistant steel created by alloying copper, chromium and nickel. In addition to this, COR-Ten A steel plate has added phosphorous which makes the material best suited for gas flue applications and for aesthetic fascia. The material is not recommended in heavy load bearing applications
COR-Ten A steel plate chemical composition:

Grade	C max	Si	Mn.	P	S max	Cr	Ni max	Cu	Al
COR-Ten A	0.12	0.25-0.75	0.20-0.50	0.07-0.15	0.030	0.50-1.25	0.65	0.25-0.55	0.015-0.06

COR-Ten A steel plate Mechanical Properties (thickness≥3mm):

Grade	Yield Strength MPa(min)	Tensile Strength MPa	Elongation % (min)
COR-Ten A	345	470-630	20

To learn more about COR-Ten A anti-corrosive steel plate, contact us at any time. We look forward to establishing a good and long-term business relationship with you.