-
The demand for reliable materials in cryogenic service applications has increased significantly with the rapid growth of LNG terminals, industrial gas storage facilities, and low-temperature pressure vessels.2026-06-24
-
As the global demand for liquefied natural gas (LNG) continues to grow, the need for reliable materials for cryogenic storage systems has become increasingly important.2026-06-18
-
For engineers specifying materials for cryogenic pressure vessels, finding the balance between strength and ductility at sub-zero temperatures is challenging.2026-06-12
-
In industries where equipment must operate reliably under freezing or cryogenic conditions, material selection becomes a matter of safety and structural integrity.2026-06-01
-
While both ASTM A203 Grade B and ASTM A106 Grade B serve critical roles in industrial applications, they are fundamentally different in composition, purpose, and performance.2026-06-01
a387 grade 12 class 2 steel plate,a387 grade 12 class 2 steel chemical composition
a387 grade 12 class 2 steel is a kind of high quality chrome molybdenum steel, it is mainly used for elevated temperature service. a387 grade 12 class 2 steel offers excellent anti corrosion characteristics.
|
Element |
|
Chemical Composition (%) inc. Grade & UNS No. |
|
|
|
Grade 12 (UNS: K11757) |
|
Carbon: |
Heat Analysis: |
0.05 - 0.17 |
|
|
Product Analysis: |
0.04 - 0.17 |
|
Manganese: |
Heat Analysis: |
0.40 - 0.65 |
|
|
Product Analysis: |
0.35 - 0.73 |
|
Phosphorus: |
Heat Analysis: |
0.035 |
|
|
Product Analysis: |
0.035 |
|
Sulphur (max): |
Heat Analysis: |
0.035 |
|
|
Product Analysis: |
0.035 |
|
Silicon: |
Heat Analysis: |
0.15 - 0.40 |
|
|
Product Analysis: |
0.13 - 0.45 |
|
Chromium: |
Heat Analysis: |
0.80 - 1.15 |
|
|
Product Analysis: |
0.74 - 1.21 |
|
Molybdenum: |
Heat Analysis: |
0.45 - 0.60 |
|
|
Product Analysis: |
0.40 - 0.65 |
|
Designation: |
Requirement: |
Grade 12 |
|
A387 Grade 12
|
Tensile strength, ksi [MPA] |
65 to 85 [450 to 585] |
|
Yield strength, min, ksi [MPa]/(0.2% offset) |
40 [275] |
|
|
Elongation in 8 in. [200mm], min % |
19 |
|
|
Elongation in 2 in. [50mm], min, % |
22 |
|
|
Reduction of area, min % |
––– |
|
BS |
EN |
ASTM/ASME |
DIN |
|
620 B |
13 CRMO 45 |
A387-12-2 |
13 CRMO 44 |