-
Executive Standard: SA299 Gr. B steel plates comply with the ASME standard, specifically ASTM A299/A299M.2026-08-26
-
SA299 is a carbon-manganese-silicon steel plate designed for pressure vessels—often referred to as "gas drum steel" under US standards.2026-08-19
-
ntroduction to SA299 Gr.A Steel Plate:
SA299 Gr.A is a steel plate grade designated for boilers and pressure vessels under American standards.2026-08-11 -
A285 Gr.C and SA285 Gr.C steel plates represent the same grade, though they are governed by different standards.2026-08-04
-
SA283 Gr.B is a low-to-medium strength carbon structural steel plate conforming to the American Society of Mechanical Engineers (ASME) standard.2026-07-31
DIN17102 E St E 355 steel Mechanical Property,DIN17102 E St E 355 steel ex-stock
DIN17102 E St E 355 steel is used for Boilers and Pressure Vessels steels. DIN17102 E St E 355 steel is a normalized steel which is mainly used for building pressure vessels and boilers and pipes for hot liquid.
DIN17102 E St E 355 steel Chemical Composition:
|
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
Cr |
Ni |
N |
|
0.18 |
0.50 |
0.90-1.70 |
0.025 |
0.015 |
≤0.30 |
≤ 0.50 |
≤0.020 |
|
Mo |
Al |
Cu |
Nb |
Ti |
V |
Other |
|
|
≤0.08 |
≥0.020 |
≤0.30 |
≤0.05 |
≤ 0.03 |
≤ 0.10 |
Nb+Ti+V≤0.12 |
|
DIN17102 E St E 355 steel Mechanical Property:
|
Properties |
Conditions |
||
|
T (°C) |
Treatment |
||
|
Density (×1000 kg/m3) |
7.7-8.03 |
25 |
|
|
Poisson's Ratio |
0.27-0.30 |
25 |
|
|
Elastic Modulus (GPa) |
190-210 |
25 |
|
|
Tensile Strength (Mpa) |
1158 |
25 |
oil quenched, fine grained, tempered at 425°C |
|
Yield Strength (Mpa) |
1034 |
||
|
Elongation (%) |
15 |
||
|
Reduction in Area (%) |
53 |
||
|
Hardness (HB) |
335 |
25 |
oil quenched, fine grained, tempered at 425°C |
DIN17102 E St E 355 steel Thermal Property:
|
Properties |
Conditions |
||
|
T (°C) |
Treatment |
||
|
Thermal Conductivity (W/m-K) |
42.7 |
100 |
|
|
Specific Heat (J/kg-K) |
477 |
50-100 |
|
DIN17102 E St E 355 steel Physical Property:
|
Quantity |
Value |
Unit |
|
Thermal expansion |
16 - 17 |
e-6/K |
|
Thermal conductivity |
16 - 16 |
W/m.K |
|
Specific heat |
500 - 500 |
J/kg.K |
|
Melting temperature |
1370 - 1400 |
°C |
|
Service temperature |
0 - 500 |
°C |
|
Density |
8000 - 8000 |
kg/m3 |
|
Resistivity |
0.7 - 0.7 |
Ohm.mm2/m |
DIN17102 E St E 355 steel ex-stock, DIN17102 E St E 355 steel chemical analysis, DIN17102 E St E 355 steel mechanical properties and more information, the above is BEBON STEEL can offer for you. Dear friends, if you have any need, please contact BEBON STEEL.