-
The demand for reliable materials in cryogenic service applications has increased significantly with the rapid growth of LNG terminals, industrial gas storage facilities, and low-temperature pressure vessels.2026-06-24
-
As the global demand for liquefied natural gas (LNG) continues to grow, the need for reliable materials for cryogenic storage systems has become increasingly important.2026-06-18
-
For engineers specifying materials for cryogenic pressure vessels, finding the balance between strength and ductility at sub-zero temperatures is challenging.2026-06-12
-
In industries where equipment must operate reliably under freezing or cryogenic conditions, material selection becomes a matter of safety and structural integrity.2026-06-01
-
While both ASTM A203 Grade B and ASTM A106 Grade B serve critical roles in industrial applications, they are fundamentally different in composition, purpose, and performance.2026-06-01
EN 10028-3 275 NL 2 steel,EN 10028-3 275 NL 2 steel Specification
EN 10028-3 275 NL 2 steel is a weldable fine-grain steel suitable for the fabrication of pressure vessels for pressurised gases and chemicals, industrial boilers, compressors and heat exchangers. EN 10028-3 275 NL 2 steel is intended for use in moderate to high temperature service.
EN 10028-3 275 NL 2 steel characteristic:
1.EN 10028-3 275 NL 2 steel has good strength, it can be made of boilers and components to withstand a certain long-term high temperature stress;
2.EN 10028-3 275 NL 2 steel has good toughness and low effectiveness of the tendency in the use of bending, curling, deformation processing such as cold, after more prolonged storage and use remains a good toughness;
3.EN 10028-3 275 NL 2 steel has good weldability and resistance to intergranular corrosion. For the manufacture of boiler drum, beams and wall panels.
EN 10028-3 275 NL 2 steel Specification:
Thickness: 8mm-300mm
width: 1500mm-4020mm
Length: 3000mm-18000mm
PS: EN 10028-3 275 NL 2 steel plate maximum weight can not beyond 25 tons.
According to the above EN 10028-3 275 NL 2 steel characteristics and needs of users, EN 10028-3 275 NL 2 steel has hot rolled, controlled rolling, normalizing, annealing, tempering, normalizing + tempering, tempering delivery states.
EN 10028-3 275 NL 2 steel Chemical Composition:
|
Grade |
C. % |
Mn. % |
S. ≤ |
N |
Cu |
Si. |
P. m≤ |
AL. |
Vi |
|
P275NL2 |
0.08-0.20 |
0.90-1.50 |
0.015 |
≤0.012 |
≤0.30 |
≤0.40 |
0.025 |
≤0.020 |
≤0.02 |
EN 10028-3 275 NL 2 steel Mechanical Property:
|
Grade |
Type |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
|
|
Normalized |
≤ 16 |
275 |
390 to 510 |
24 |
More information, please contact us - BEBON STEEL.