-
Steel grating plate is made of flat steel in accordance with a certain distance and twisted square steel cross arrangement, with pressure welding machine or artificial welding. The surface after hot dip galvanized or plastic spray treatment, so as to achi2021-09-17
-
According to preliminary statistics provided by the Brazilian ministry of development, industry and foreign trade, in December 2012 Brazil's flat steel exports totaled 208,581 tonne rising by 15.8% YoY and down 6.5% from November 2012. Brazilian flat2019-11-06
-
Forbes reported that the Chinese economy is improving the nations leading steel companies reported profits in November for the first time in 4 months. Statistics from the China Iron and Steel Association showed that the biggest steel firms there have2019-11-06
-
Indias minister of steel Mr Beni Prasad Verma congratulated the Indian steel industry on being the number one in terms of growth rate in steel production amongst the top ten steel producing countries. Congratulating the Steel Industry he said, I take2019-11-06
-
The Express Tribune reported that gas shortages have pushed a number of steel mills in sectors I - 9 and I - 10 to using coal, increasing the level of pollution in the city. Mr Asif Shuja director general of Pakistan Environmental Protection Agency s2019-11-06
EN 10028-3 P 355 N steel,P 355 N steel Chemical Composition
EN 10028-3 P 355 N steel is a boiler and pressure vessel steel grade.
EN 10028-3 P 355 N steel is mainly used to for manufacturing boilers, pressure vessels and pipes transporting hot liquids.
EN 10028-3 P 355 N steel Chemical Composition:
Carbon (C) 0.10-0.22
Manganese (Mn) 1.10-1.70
Silicon (Si) ≤0.60
Phosphorous (P) ≤0.025
Sulphur (S) ≤0.015
Aluminium (Al) ≤0.020
Nitrogen (N) ≤0.012
Chromium (Cr) ≤0.30
Copper (Cu) ≤0.30
Molybdenum (Mo) ≤0.08
Niobium (Nb) ≤0.020
Nickel (Ni) ≤0.30
Titanium (Ti) ≤0.03
Vanadium (Vi) ≤0.02
EN 10028-3 P 355 N steel Specification:
Thickness:6mm-300mm
Width:1500mm-4050mm
Length:3000mm-15000mm
About EN 10028-3 P 355 N steel Mechanical Property, different thickness has different property, such as:
When thickness is below 16mm, Min Yield is 355 Mpa, Tensilmie is 510-650 Mpa.
When thickness is between 16mm to 40mm, Min Yield is 345 Mpa, Tensilmie is 510-650 Mpa.
When thickness is between 40mm to 60mm, Min Yield is 335 Mpa, Tensilmie is 510-650 Mpa.
When thickness is between 60mm to 100mm, Min Yield is 315 Mpa, Tensilmie is 490-630 Mpa.
When thickness is between 100mm to 150mm, Min Yield is 295 Mpa, Tensilmie is 480-630 Mpa.
When thickness is between 150mm to 250mm, Min Yield is 280 Mpa, Tensilmie is 470-630 Mpa.
However, there are also differences between each other. The same is that, the Min Elongation is 20%, the Min Impact Energy at -20°is 27 KV J, at 0°is 34 KV J, at 20°is 40 KV J.
BEBON STEEL is a global steel supply and stockholding company. We can provide a single competitive source for the distribution of steel products worldwide. So, if have any need EN 10028-3 P 355 N steel, pleace contact BEBON STEEL.