-
ASTM A202 Pressure Vessel Steel Material and Grades:
Alloy System: **Chromium-Manganese-Silicon (Cr-Mn-Si)** Low-Alloy Heat-Resistant Steel2026-04-17 -
ASTM A204/A204M Grade B molybdenum alloy steel plates for pressure vessels feature superior chemical composition and mechanical properties compared to Grade A2026-04-10
-
As a molybdenum-alloy steel plate for pressure vessels under the ASTM A204/A204M standard, A204 Gr.A is a low-alloy, high-strength material specifically designed for service conditions involving moderate temperatures (≤400°C) and moderate-to-high pressure2026-03-31
-
Key Characteristics of P295GH Steel2025-12-22
-
Characteristics of DIN 17102 WStE 255 Steel2025-12-19
EN 10028-3 P 355 NH steel, EN 10028-3 P 355 NH steel Available dimension
EN 10028-3 P 355 NH steel is characterised by a minimum yield strength of 275-460 N/mm2, by good weldability and high resistance to brittle cracking. EN 10028-3 P 355 NH steel is used above all for manufacturing vessels for pressurised gas (LPG, butane and propane tanks), pressure vessels, steam boiler parts, pressure piping, compressors ect.
EN 10028-3 P 355 NH steel Available dimension:
Hot-rolled coils unpickled, mill edge:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
900 –1400 |
|
2,25 – 2,49 |
900 –1450 |
|
2,50 – 2,99 |
900 –1500 |
|
3,00 – 3,99 |
900 –1680 |
|
4,00 – 6,00 |
900 –1750 |
|
6,01 –12,70 |
900 –1750 |
Hot-rolled slit strip:
|
Thickn. in mm |
Width in mm |
|
2,00 – 2,24 |
100 – 690 |
|
2,25 – 2,49 |
100 – 715 |
|
2,50 – 2,99 |
100 – 740 |
|
3,00 – 4,50 |
100 – 800 |
|
4,50 – 6,00 |
116 – 800 |
|
6,01 – 7,00 |
175 – 800 |
|
7,01 – 8,00 |
233 – 800 |
The best quality, best service, most complete information, BEBON STEEL, as a professional steel supplier, promise to you that we will meet your requirements at a maximum limit. If need EN 10028-3 P 355 NH steel, please contact BEBON STEEL.